- Before you begin:
- Check if your hardware is supported on the system requirements page.
- Installation variants:
Choose your installation variant and follow the instructions.
Choose the Dedicated drive variant if you like to install openmediavault from scratch on x86/AMD64 hardware. For SBC systems based on the ARM32/64 architecture use the Debian Operating System variant.
- Dedicated drive - Advised method via ISO image. This runs OMV from its own drive.
- USB flash drive - This runs openmediavault from a USB flash drive.
- Debian Operating System - Use an existing Debian OS installation for openmediavault.
- Debian Operating System via debootstrap. Use this as a last resort in case the installer does not recognize a specific essential hardware component like hard disk (NVME) or a network card that needs a higher kernel (backport).
- SD card - This runs openmediavault from a SD card.
- First time use:
If you have a screen attached, KVM or IMPI console the login screen will display the current IP address assigned for the web interface. Open your browser and type that IP address. The default web interface login credential is
rootpassword is the one you setup during installation.
For ARM images the root password is the same as admin password.
openmediavault will enable SSH access for the user
rootby default to be able to access a headless system in case of a broken installation or other maintenance situations. You should disable this behaviour in the
Services | SSHpage for security reasons after installation.
To still get
rootaccess you need to create a non-privileged user and add them to the
sudogroups. After that you can SSH into the system with this non-privileged user and run